Drilling and Completion Fluids

Why our customers trust us

More than 20 years of delivering industry leading service

More than 20 years of delivering industry leading service

Complete end to end supply chain

Complete end to end supply chain

Warehouses located nationwide

Warehouses located nationwide

Expert specialty chemical representatives dedicated to your order

Expert specialty chemical representatives dedicated to your order

Product name
CAS
Formula

Acetaldehyde

CAS75-07-0
FormulaC2H4O
SynonymEthanal, acetic aldehyde, Acetaldehyde, Acetaldehyde
Density0.788 (164 c)
Pounds/Gallon6.449 to 6.532
Boiling Point20.00 to 21.00 °C. @ 760.00 mm Hg
Vapor Density1.5
logP (o/w)-0.16
Shelf Life12 month(s) or longer if stored properly.
OdorPungent, etherial, fresh, lifting, penetrating, fruity and musty
Refractive Index1.32300 to 1.33700 @ 20.00 °C
Odor Typeethereal
Boiling Point-54.00 to -53.00 °C. @ 15.00 mm Hg
Flash Point-40.00 °F. TCC
Appearancecolorless clear liquid
Assay99.00 to 100.00 %
Specific gravity0.77500 to 0.78500 @ 25.00 °C
Melting Point-125.00 to -123.00 °C. @ 760.00 mm Hg
Vapor Pressure902.000000 mm/Hg @ 25.00 °C
Storagerefrigerate in tightly sealed containers.
TastePungent, fresh, aldehydic, refreshing and green
Molecular weight44.06
Colorcolorless fuming liquid or gas

2-Butoxyethanol

CAS111-76-2
FormulaC6H14O2
SynonymEthylene Glycol Monobutyl Ether, Butyl Glycol, butyl cellosolve, Ethanol, 2-butoxy-, 2-Butoxyethanol, ethylene glycol monobutyl ether, EGBE
Molecular weight118.2
Viscosity2.9 cP (@25°C)
Vapor Pressure0.66 mmHg (@20°C)
Flash Point149°F
Freezing Point-107°F
Specific gravity0.901 (20/20°C)
Surface Tension27.4 dynes/cm (@25°C)
Specific Heat2.38 J/g/°C (@25°C)
Auto Ignition Temp471°F
Evaporation Rate0.079
Boiling Point340°F
Odormild pleasant odor
Melting Point-74.8 c
Colorcolorless clear mobile liquid
Solubilitywater, alcohol, ether

Sodium Nitrate

CAS7631-99-4
FormulaNaNO3
SynonymNitrate of Soda, Nitric acid sodium salt (1:1), Nitric acid, sodium salt
Density2.267
Slightly Solublein alcohol, oxygenated solvs.
Direct Evaporative Cooling380 c
Lead4 ppm Max.
IdentificationPositive (for Sodium)
IdentificationPositive (for Nitrate)
Total Chlorine ContentTo pass test
Assay99.0 - 100.5% (Dried basis)
pH5.5-8.3 (5)
Odorodorless
Melting Point308 c
Molecular weight85.01
Colorcolorless transparent crystal or granulated powder
Solubilitywater, glycerol

Dodecenyl Succinic Anhydride

CAS25377-73-5; 26544-38-7
FormulaC16H26O3
SynonymDDSA, 3-[(E)-dodec-1-enyl]oxolane-2,5-dione
Viscosity @ 25°C290 - 355 cp
Gel Time @ 100°C60 minutes
Acid Number410 - 432 mgKOH/g
Refractive Index1.470 - 1.480
Anhydride98.0% Min.
Free Acid2.0% Max.
Color, Gardner6 Max.
AppearanceClear, light yellow liquid

Ethylene Glycol

CAS107-21-1
FormulaC2H6O2
SynonymMonoethylene Glycol, Glycol alcohol, Ethylene dihydrate, Tescol, 1,2-Ethanediol, Ethane-1,2-diol, Ethylene glycol
Viscosity17.3 cps
Dielectric Constant37.7
Surface Tension48.49 dynescm
Water MiscibilityPasses
AppearanceClear
Water Content0.5%Max.
Boiling Range194C (IBP)
Density1.113 - 1.116 (@20C)
Color, APHA10 Max.
Purity99.5% Min.
Acidity as Acetic Acid0.002% Max.
Ash0.002% Max.
Boiling Range205 (DP)
Melting Point-13 c
Refractive Index1.43063
Molecular weight62.07
Colorcolorless clear liquid, sweet taste (poisonous)
Flash Point(oc) 115 c
Specific gravity1.1135 (204 c)
Solubilitywater, lower aliphatic alcohols, glycerol, glycol ethers, acetone, most org. solvs.
Boiling Point197.6 c

Diethylene Glycol

CAS111-46-6
FormulaHO(CH2)2O(CH2)2OH
SynonymDEG, Ethanol, 2,2'-oxybis-
Ash0.001% Max.
Color10 Max.
Boiling Range242 C Min. (IBP)
AppearanceClear
TEG Content0.2% Max.
Acidity as Acetic Acid0.005% Max.
Water0.1% Max.
Boiling Range252 C Max. (DP)
Density1.115 - 1.119 g/ml (@20C)
MEG Content0.2% Max
Purity99.5% Min.
Vapor Pressure1 mm hg (91.8 c)
Odorpract. odorless, sweetish taste
Molecular weight106.12
Flash Point124 c
Boiling Point245 c

Ammonium Chloride

CAS12125-02-9
FormulaNH4Cl
SynonymAmmonium muriate, Ammonium chloride ((NH4)Cl), Ammonium chloride
Density1.5274
Moisture0.25% max
Iron5 ppm max
Heavy Metals10ppm max
Arsenic1 ppm max
pH of a 5% solution3.8 - 6.0
Phosphate0.2% max
Residue on Ignition300 ppm max
Assay99.5 - 99.9%
pH4.5-5.5 (1m water, 20 c)
Melting Point337.8 c
Molecular weight53.50
Colorcolorless to white crystal or powder, cooling saline taste
Solubilitymethanol, ethanol
Boiling Point520 c

Molybdenum Disulfide

CAS1317-33-5
FormulaMoS2
SynonymMolybdenite, Molybdenum sulfide (MoS2)
Density4.8 gcm3
Acid Number0.05
MoO30.05% max
Acid insolubles0.50% max
Oil0.05% max
C1.50% max
GradeTechnical
MoS298.0% min
Fe0.25% max
Particle Size30 um
H2O0.02% max
Insolubilityin water, dil. acids, org. solvs.
Odorodorless
Melting Point2375 c
Molecular weight160.08
Solubilityaqua regia, conc. sulfuric acid

Sodium Nitrite

CAS7632-00-0
FormulaNaNO2
SynonymDiazotizing salts, Nitrous acid sodium salt, Nitrous acid, sodium salt (1:1), Sodium nitrite
Density2.168
Slightly Soluble. or wh. cryst. or powd., bitter sl. saline taste
Melting Point271 c
Molecular weight69.00
Solubilitywater, sl. sol. in alcohol, ether, oxygenated solvs.
Boiling Pointdec. 320 c

Melamine

CAS108-78-1
FormulaC3H6N6
Synonym1,3,5-Triazine-2,4,6-triamine, cyanuric triamide, 1,3,5-Triazine-2,4,6-triamine
Density1.573 (250 c)
Slightly Solublein water
Very Solublein hot alcohol
Particle size, unground99% thru 200 mesh
pH8.7
Particle size, unground96% thru 325 mesh
Color, APHA20 Max.
Melamine99.8% min
Moisture0.01%
Ash0.01%
Turbidity20 Max.
Insolubilityin ether
Melting Point250 c
Molecular weight126.15
Colorcolorless monoclinic prisms
Flash Point300 c
Boiling Pointsublimes

Nonylphenol Ethoxylate

CAS9016-45-9
FormulaC9H19C6H4(OCH2CH2)nOH
SynonymEthoxylated nonylphenol, Nonyl Phenyl Polyethylene Glycol Ether, Poly(oxy-1,2-ethanediyl), .alpha.-(nonylphenyl)-.omega.-hydroxy-
Description9.5 mole
Specific gravity (@20/20C)1.05 - 1.07
Color, Pt-CoMax 100
Cloud Point52 - 58ºC
pH5.0 - 8.0

Xanthan Gum

CAS11138-66-2; 11078-31-2
Synonymcorn sugar gum, gummi xanthanum
ColorWhite to cream
Viscosity @25°C1200 - 1800 cps
Prruvic Acid1.5% min
Assay91.0 - 108.0%
V1:V21.02 - 1.45
pH6.0 - 8.0
Loss on Drying6.0 - 12.0%
Ash13.0% max
Nitrogen1.5% max
Heavy Metals20 mg/kg max
AppearanceFree flowing powder
Lead5 mg/kg max
Total Plate Count2000/g max
Yeast and Mold100/g max
PathogensAbsence
SalmonellaNegative
S. AureusNegative
Pseudomonas aeruginosaNegative
Particle Size98% min
C. PerfringensNegative

Silicon dioxide

CAS7631-86-9
FormulaSiO2
SynonymSilica, Silicon dioxide
AppearanceWhite Solid, odorless
pH6-9
Boiling Point2230° C
Flash PointNon-combustible
Specific Gravity (20°C)2.2
Melting Point1710° C
Solubility in waterInsoluble

Croscarmellose Sodium

CAS74811-65-7
SynonymSodium Carboxymethylcellulose, Sodium CMC
Contents of water soluble materials (%)1.0 - 10.0
Identification A, B, CConforms
Degree of substitution0.60 - 0.85
Settling volume (ml)10 - 30
pH (1%)5.0 - 7.0
Heavy metals (ppm)<10
Loss on drying (%)<10.0
Organic Volatile ImpuritiesWithin limit
ColorWhite or off white
AppearanceFree-flowing, fibrous powder
Sodium chloride and sodium glycolate (%)<0.5

Sodium Chloride

CAS7647-14-5
FormulaNaCl
SynonymSalt, Halite, Rock Salt, Saline, Sodium chloride (NaCl)
Iron<= 1.0 ppm (Free Iron)
Heavy metals (as Pb)<= 2.0 ppm
Sieve Analysis<= 9 % (Retained on USS 325 Mesh)
Sieve Analysis>= 89% (Passes USS 325 Mesh)
Sodium Chloride>= 99.7%
Arsenic<= 1.0 ppm
Calcium + Magnesium<= 875 ppm (as Ca)
Tricalcium phosphate1.4 - 2.0%
Other Salts<= 0.12%
Calcium Sulfate<= 0.24%
Sieve Analysis<= 2% (Retained on USS 200 Mesh)
Moisture< 0.1% (Surface)
Copper<= 0.5 ppm

Boric Acid

CAS10043-35-3
FormulaH3BO3
SynonymBoracic Acid, Orthoboric Acid, Boric acid (H3BO3)
Density1.435
Insolubilityin ether, benzene
Odorodorless
Melting Point171 c
Molecular weight61.83
Colorwhite or colorless crystal powder, granulated
Solubilitywater, alcohol, glycerol
Boiling Point300 c

Sodium Persulfate

CAS7775-27-1
FormulaNa2SaO2
SynonymPeroxydisulfuric acid, disodium salt, sodium persulphate, Peroxydisulphuric acid, Peroxydisulfuric acid ([(HO)S(O)2]2O2), sodium salt (1:2), Disodium peroxodisulphate
SensoricWhite crystals.
Dropping PointNot Applicable
Melting PointDecomposed ar 200°C
Vapor PressureNot Applicable
Vepor DensityNot Applicable
Soluble70.2g/100g at 20°C in water.
Bulk Density0.982g/cc
Evaporation RateNot Applicable
OdorNone
Assay %99% Min
Manganese0.0001% min
Iron0.001% Max
Heavy Metals; USP <231>0.001% Max
Moisture(105°C, 2h)0.1% Max
Ammonia0.1% Max
Active Oxygen6.65% Min
Chloride and Chlorate(with Cl)0.02% Max
Direct Evaporative Coolingon heating
pH5-7 (1 soln.)
Molecular weight238.10
Specific gravity2.6
Solubilitygl in water (20 c) with gradual decomp.

Sebacic Acid

CAS111-20-6
FormulaC10H8O4
SynonymDecanedioic acid, 1,8-Octanedicarboxylic acid, Octane-1,8-dicarboxylic acid, Decanedioic acid, Decanedioic acid
Density1.207 (204 c)
Slightly Solublein hydrocarbons, chlorohydrocarbons
Very Solublein alcohols, esters, ketones
Flash Point, COC, °C221 (430)
Water Content0.3% max
Purity99.5% min
AppearanceWhite powder
Specific gravity (@25/25° C)1.2
Melting Point130 - 134C
Color, APHA50 max (4% in Ethanol)
Ash Content400 ppm max
Acid Number (mg KOH/g)550 min
Vapor Pressure1 mm hg (183 c)
Odormonoclinic prismatic tablets, wh. powd., fatty acid odor
Molecular weight202.28
Solubilityhot water, oxygenated solvs.
Boiling Point294.5 c (100 mm)

Maleic Anhydride

CAS108-31-6
FormulaC4H2O3
SynonymMA, MAA, MALA, MAN, cis-Butenedioic anhydride, 2,5-Furandione, 2,5 Furandione
Density0.934 (204 c)
Partly Solublein chloroform, benzene
Dropping PointAprox. 202 ºC
Percent Volatile by Weight0
Purity99.5% min
Flash Point COC °C215 ºF
OdorMild acrid odor.
Solubility test (10 grams in 80 gram Ipopropyl Alcohol)Soluble in water.
Specific Gravity (20°C)1.43 (Solid)
Vapor Pressure (mm Hg)10 @79ºC
Vapor Density3.38
Molecular Weight (theoretical)98.06
Melting PointApprox. 53ºC
Odor Threshold0.32 ppm
Colorcolorless needles
Molecular weight98.06
Flash Point(cc) 102 c
Solubilityacetone, ethyl acetate, hydrocarbons, alcohol, dioxane, oxygenated solvs.
Boiling Point200 c

Sodium Hydroxide

CAS1310-73-2
FormulaNaOH
SynonymCaustic soda, Lye, Sodium hydroxide (Na(OH)), Sodium hydroxide
Density2.12 (204 c)
Melting Pointapp. 321 °C
Fe< 10 mg/kg
Particle Distribution0.50 - 1.0 mm ---- app. 90 %0.25 - 0.5 mm -----
Bulk Density1.10 - 1.16 g/cm3
Molar Mass40 g/mol
NaOH99.0 - 99.7 %
Solubility (grams/100 gramg water) at 0°CIn Water:@ 0 °C ---- 42 g/100 cm3@ 20 °C ---
NaClO3< 15 mg/kg
NaCl< 0.04 %
Density (lbs/gal(US)@20°)(@ 20 °C) : 2.13 g/cm3
Na2CO3< 0.4 %
Na2SO4< 0.02 %
Vapor Pressure1 mm (739 c)
Molecular weight40.00
Solubilitywater, alcohol, methanol, glycerin
Boiling Point1390 c

Ammonium Persulfate

CAS7727-54-0
Formula(NH4)2S2O8
SynonymPeroxydisulfuric acid, Ammonium Persulphate, Diammonium peroxidisulfate, Peroxydisulphuric acid, Peroxydisulfuric acid ([(HO)S(O)2]2O2), ammonium salt (1:2), Diammonium peroxodisulphate
Active Oxygen7.0%
Iron0.001% Max
Density1.982
Direct Evaporative Coolingin water forming o2
Decomposition temperature177°C
Assay98.0 % Min
Manganese0.0001% Max
Bulk Density1.15 g/cc
Residue on Ignition0.1% Max
Heavy Metals, as Pb0.003% Max
SensoricWhite Crystaline Powder
Chlorides0.005 % Max
Solubility70.0 @ 20 °C
Melting Pointdec. 120 c
Molecular weight228.20

Aluminum Stearate

CAS300-92-5
Formula[CH3(CH2)16COO]2Al(OH)
SynonymAluminum Distearate, Aluminum, hydroxybis(octadecanoato-.kappa.O)-, Hydroxyaluminium distearate
Density1.009
Melting Point145 - 165 °C
Loss on Drying1.5 % Max
AppearanceFine White Powder
Free Fatty Acid4.0 - 7.0%
Bulk Density220 - 290 g/l
Metal Content4.7 - 5.3%
Insolubilityin water, alcohol, ether
Molecular weight611.05

Itaconic Acid

CAS97-65-4
FormulaC5H6O4
SynonymMethylensuccinic Acid, Butanedioic acid, 2-methylene-
Freezing Point (°C)166.00 - 167.00 °C
OdorCharacteristic Odor
Residue on Ignition0.05% Max.
pHN/A
Formula Weight130.1
Loss on Drying0.5% Max.
Melting Point165-168°C
Physical StateSolid
Dropping Point268 °C(Sublimes)
Density1.63
Very Solublein benzene, chloroform, ether, cs2, petroleum ether
Vapor PressureN/A
Fe10 PPM Max.
Sulfates50 PPM Max.
SensoricWhite Crystaline powder
Chlorides10 PPM Max.
Assay %99.5% min
Heavy Metals; USP <231>30 PPM Max.
Density/Specific Gravity (H2O=1, @ 4 °C)(H2O=1, @ 4 °C) : 1.573
Vapor DensityN/A
Molecular weight130.10
Solubilitygml) 12 ml water, 5 ml alcohol

Adipic Acid

CAS124-04-9
Formula(CH2)4(COOH)2
SynonymHexanedioic Acid, Butanedicarboxylic Acid, Hexanedioic acid, Adipic acid
Density1.360 (254 c)
Slightly Solublein water
Very Solublein alcohol
Adipic Acid99.7 min. %wt
Water0.2 max. %wt.
Ash2.0 max. ppm
Iron0.5 max. ppm
Methanol Solution Color, APHA6.0 max.
Total Nitrogen1.5 max. ppm
Vapor Pressure1 mm hg (159.5 c)
Melting Point152 c
Odorwh. monoclinic prisms, pract. odorless
Molecular weight146.16
Flash Point(cc) 385 f
Solubilityacetone, oxygenated solvs.
Boiling Point337.5 c

Oxalic Acid

CAS144-62-7
FormulaC2H2O4
SynonymEthanedioic Acid, Oxalic acid
Density1.90
Very Solublein alcohol, glycerol
Partly Solublein ether
Heavy Metals0.001% max
Loss on Ignition0.06% max
Sulfates, as SO4% by wt0.81% Max
Chlorides0.001% max
Iron0.001% max
SensoricWhite crystalline powder
Purity99.6% min
pH1.3 (0.1m aq.)
Insolubilityin benzene, chloroform, petrol. ether
Odorodorless
Melting Point187 c (dec.)
Colorcolorless transparent crystal
Molecular weight90.04
Solubilitywater
PreviousNext
Hero Background Image

Get a Quick Quote Now!

Enter a chemical name, synonym or CAS# below
Card Icon
Card Icon
Card Icon
Card Icon
Card Icon
Card Icon